BTECH GMRS-20V2 - Deleting Channels; Computer Programming

24
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
5. Enter the frequency desired to add as a scanner/receive only channel (136-174MHZ, 400-
520MHz)
6. Press the key to confirm and save.
7. Press the key to exit the menu.
Deleting Channels
To DELETE an added channel
1. Press the key to enter the menu
2. Enter 47 on the numerical keypad to get to DEL-CH
3. Press to select.
4. Use the and keys to select an empty memory channel or enter it directly on the numerical
keypad.
5. Press the key to confirm.
6. Press the key to confirm and save.
7. Press the key to exit the menu.
Computer!programming!
The GMRS-20V2 kit does not include a programming cable. The GMRS-20V2 uses the PC04 Programming
cable. To attain a cable visit: baofengtech.com The programming software is free at: baofengtech.com.