VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
DTMF saved setting on Menu 22 and then press the call key to send the saved DTMF TX tone.
DTMF Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select DTMF function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The DTMF
Signal must be saved first in the PC software setting under DTMF settings.
3. If properly set up (on Menu 18 and 19), your radio will open the squelch when it receives the
required DTMF signal.
4. Press [Call] Key to send the same DTMF you have selected in Menu 22.
2TONE Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select 2TONE function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The 2Tone
Signal must be saved first in the PC software setting under 2TONE settings)
3. If properly set up (on Menu 18 and 19), your radio will open the squelch when it receives the
required 2TONE signal.
4. Press [Call] Key to send the same 2TONE you have selected in Menu 22.
5Tone Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select 5TONE function.
To Next Page
Loading...
