VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
CTCSS!
CTCSS is set with menus 11 R-CTCS and 13 T-CTCS.
Procedure 8.1. CTCSS setup how-to
1. Press the key to enter the menu.
2. Enter on the numeric keypad to get to receiver CTCSS.
3. Press to select.
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad.
5. Press to confirm and save.
6. Enter on the numeric keypad to go to transmitter CTCSS.
7. Press to select.
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad. Make sure it's the same
frequency as that you entered for receiver CTCSS.
9. Press to confirm and save.
10. Press to exit the menu system.
To turn CTCSS off, follow the same procedure but set it to off with the key instead of selecting a CTCSS
sub-tone frequency.
For more information see the section called “11 R-CTCS - Receiver CTCSS” and the section called “13 T-CTCS -
Transmitter CTCSS” in Appendix B, Menu definitions.
!
To Next Page
Loading...
