VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Chapter 5. ā Other Settings
Toggle from High to Low Power
Also, a SHORT (momentary) press of the key will switch from low to high power on each short press
Keypad Lock-out
Hold the microphone for 2 seconds at standby to turn on/off the keypad lock-out function.
(The Lock icon appears, when the radio is locked out), repeat to unlock.
PTT ID Setting
1. Use PC software to change PTT-ID code.
2. Set the Menu 18 settings on the radio to select the PTTID signal mode (2Tone, 5Tone, or DTMF),
3. Set the Menu 20 settings to select when the PTTID is transmitted.
4. Set the Menu 21 settings to program the PTTID transmit delay time.
5.When all the settings are set, when you transmit (Press the PTT) The radio will transmit the PTTID.
DTMF RX Settings
This radio has DTMF coding and decoding. Use the PC software to set the DTMF signal settings first.
To Next Page
Loading...
