VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
turning on - no matter what state it was in when
powering down. Also, the radio will scan after Menu
operations or transmitting
TRACKED is used in conjunction with Menu52 and will
transmit in response to the active receiving channel
(depending on the TMR delay time you have set on
Menu 52 before returning to the primary selected
channel.
FIXED- Will only TX on Primary Selected Channel
Adjust the output volume of the radio. The higher the
number, the higher the volume
Quickly add GMRS channel. XX is the GMRS channel
number to be added
Selects the ratio of sleep cycles to awake cycles(1:1,
1:2…1:8).The higher the number the longer increases
the RX sleep cycle, but you may miss the first few
syllables before the RX opens.
Initialize to
Factory Defaults
Resets to factory default arrangement. Menu and
Channel Initialization
To Next Page
Loading...
