Bticino 343100 User Manual

14
3 Configuration
3.2.3 Deleting all master codes
The display flashes until the
operation is completed.
An audible signal confirms the
deletion.
- The operation cannot be cancelled.
- Once all master codes have been deleted the default master code will be reinstated
automatically (0000).
3.2.4 General device reset
The operation cannot be cancelled.
The “LOAD” message
appears until the reset
operation has been
completed. Once the
operation has been
completed the device
returns to stand-by mode.
When the device is reset, all the default settings are reinstated.

Bticino 343100 Specifications

General

Product Type	Video Internal Unit
Power Supply	12V DC
Installation Type	Wall-mounted
Communication Type	Wired
Type	Video Intercom
Mounting	Surface
Technology	2-wire
Display	LCD
Night Vision	No
Protection Rating	IP30