Bticino 346310 - User Manual

1
290 mm
170 mm
170 mm
210 mm
1 2
3
11
4
5
6
7
8
10
9
12131415
346310
03/10/2016BT00680-c-
Description
Switchboard for 2 WIRE audio and video systems Allows access to various services
(video door entry functions, door lock/staircase light management and apartment
alarm monitoring) directly from the keypad or via the intuitive icon menu. The
switchboard is supplied with an integrated table supporting frame and also features
a 7” colour LCD display, receiver and speaker phone, dedicated keys for the main
functions and keys which can be configured. The programming can be carried out
directly from the device or via PC with TiSwitchBoardDevice software (supplied). The
device can manage the phonics of the riser EP (i.e. wired downstream of interface
346851); it cannot however manage the apartment EP (i.e. wired downstream of
interface 346850). The use of an additional power supply is recommended.
It is possible to connect up to a max. of 16 switchboards (configured from 0 to 15).
WARNING: the switchboard cannot be used in systems with 2 WIRE-IP interface
346890. The new HIERARCHICAL mode is available only with the entrance panels
of the following series: Sfera New, Linea 100, Minisfera, Linea 300.
Also check that:
351000
production week =/> 16W18
351100 , 351200 & 351300 Firmware =/> 01.02.31
346851 production week =/> 16W28
Technical data
Power supply from SCS BUS: 19 – 27 Vdc
Absorptions from BUS (without additional supply):
- stand by absorption: 35 mA
- max. operating absorption: 450 mA
Absorptions from BUS (with additional supply):
- stand by absorption: 5 mA
- max. operating absorption: 20 mA
Operating temperature: 5 - 40 °C
Relay contact output: 24 Vac / 24 Vdc
3 A, cosφ = 1
Dimensional data
Legend
1. Handset
2. 7” colour LCD display for the displaying of the user and programming menu
and of the images recorded by the entrance panel or cameras
3. Microphone
4. Navigation keypad. It enables navigating through the menus, with the pos-
sibility of confirming the selection (OK key)
5. Cancel key
6. Direct call key
7. Door lock release key
8. Directory access key
9. Entrance panel and camera cycling activation key
10. Handsfree key
11. Alarm given indication LED
12. Operating status notification LED:
LED ON (fixed)= device in stand-by
LED ON (flashing quickly) = call active
LED ON (flashing slowly) = conversation active
13.Alphanumeric keypad
14. Keypad + legend of configurable functions
15. Loudspeaker
Related items
336982 LIVINGLIGHT white series 8 pole socket for table-top installation of the
switchboard
336803 (8 poles - frayed) cable for table-top installation of the switchboard
346020 2 DIN additional power supply
Front view
2 WIRE switchboard
EN
2 WIRE Video Door Entry system

Summary

2 WIRE Switchboard Overview and Specifications

Product Description and Features

Details the switchboard's functions, capabilities, and system compatibility for audio/video entry.

Related Items and Technical Data

Lists compatible accessories and provides key technical specifications like power supply and absorption.

Front View Component Identification

Identifies and explains the function of each key and component on the switchboard's front panel.

Switchboard Configuration and System Roles

Rear View Component Identification

Details the connectors, switches, and terminals on the rear of the switchboard.

System Configuration Settings

Explains settings for address, installation type, and PC-based configuration options.

Functional Notes on System Hierarchy

Describes the roles of MASTER, BACKBONE, and RISER switchboards in hierarchical systems.

Wiring Diagrams and System Architectures

Single Riser System Wiring

Illustrates the wiring for a 2 WIRE system with a single riser and main switchboard.

Power Supply and Configuration Warnings

Highlights recommendations for additional power supply and notes on system configuration.

Independent Risers and Alarm Display Wiring

Shows wiring for systems with independent risers and common part alarm display.

Alarm Management and Configuration Notes

Details using interface F422 for alarms and the role of the main switchboard in alarm management.

Multi-Switchboard and Hierarchical System Designs

Multiple Switchboards and Risers Wiring

Illustrates systems with multiple switchboards and independent risers, including connection limits.

Power and Connection Guidelines

Highlights power supply recommendations and connection limitations for multiple switchboards.

Backbone and Riser Hierarchy Wiring

Diagrams hierarchical systems with backbone and individual riser switchboards.

System Limitations and Functionality

Explains power supply, backbone SWB video, SWB limits, and the maximum number of installable SWBs.

Complex Hierarchical System Architectures

Illustrates systems with backbone, riser, and slave switchboards for complex hierarchies.

System Configuration and Performance Notes

Provides guidelines on power supply, backbone SWB video, SWB limits, and slave behavior.

Riser Expansion and Auxiliary Services

Riser 15 Expansion Module Connections

Shows the wiring for Riser 15, including connections to expansion modules and interfaces.

Alarm and Pushbutton Interfaces

Details the configuration and connection of interfaces for alarms and pushbuttons.

Riser and Slave Switchboard Configurations

Riser SWB and Slave SWB Diagrams

Presents wiring diagrams for various Riser SWB and Slave SWB configurations.

Auxiliary Services and Ringtone Integration

Ringtone via Actuator

Details connecting an additional ringtone via an actuator to the switchboard.

Direct Ringtone Connection

Explains how to connect an additional ringtone directly to the switchboard.

Camera Integration with Switchboard

Camera Declaration and Wiring

Describes how to declare cameras in the SWB menu and their wiring connections.

Bticino 346310 Specifications

General

Model	346310
Housing Material	Plastic
Communication Type	2-Wire
Display	No
Camera	No