2120
Thermostat with display
Installer manual
5.4 Operating modes
The thermostat can operate in the following modes:
Manual / Automatic.
; Temporary manual.
Comfort; 2 customisable set-points: ideal heating and cooling temperatures
(default 21 – 25°C).
Eco; 2 customisable set-points: saving heating and cooling temperatures
(default 18 – 25°C).
Antifreeze: Minimum safety temperature (default 7°C).
Thermal protection: maximum safety temperature (default 35°C).
Off: zone off (can only be set remotely, or by contact).
With a short pressure (3 seconds maximum) of the MODE key, the system toggles between modes.
5 Functions and operating modes
5.5 Fan-coil speed
If the thermostat is configured for the management of a fan-coil type load, by pressing the FAN
key it is possible to scroll through the fan speeds available, selecting one of the following values.
With MyHome suite you can disable the automatic speed setting by local key.
Press FAN to set the fan speed at the desired level.
Note: during the adjustment the fan symbol and
the segment for the speed selected flash.
Speed 1
Speed 2
Speed 3
Automatic operation
To Next Page
Loading...
Need help?
General
