54
Thermostat with display
Installer manual
2.1 General features
The thermostat with display can be used in both heating and air-conditioning systems and can
adjust the temperature with five modes: Comfort, Eco, Antifreeze / Thermal protection, Automatic
and Manual.
Depending on the use, the backlit display shows the following information: its function and mode
(heating, cooling or automatic function; Comfort, Eco, Antifreeze/Thermal protection, Automatic,
Temporary manual or Off ), the room temperature measured, the temperature set point set, the
fan-coil fan speed, the local contact status and the zone status.
The thermostat can be used in MyHOME temperature control systems (MyHOME probe with cen-
tral unit), hotel room systems, or residential systems (individual system). The configuration can be
done by connecting the configurators to the corresponding sockets in the back of the thermostat,
or using the MyHOME_Suite software.
Programming is simple and intuitive: to switch from one mode to the other press MODE,
+ or – .
Factory settings
Heating Cooling
Adjustment interval 3 – 40 °C 3 – 40 °C
Comfort
21 °C 25 °C
Eco
18 °C 28 °C
Antifreeze
7 °C
Thermal protection
35 °C
2 Description
To Next Page
Loading...
Need help?
General
