Bticino Sfera Series User Manual

Sfera Display Module
Installer manual
31
3.6.2 Enter
1 Using the keys or the keypad Module
(if present in the handset) enter the first Block digit
3 Continue until completion
2 Press OK to confirm
5 Press and hold down OK to enter door lock code
4 The key can be used to correct any errors
Enter
door lock code
1234
Enter
address
1234
Also to enter the numeric codes for door lock release and
address it is possible to use both the keys
and the
keypad Module
Enter
Block Floor Apart.
sss
0 1 1 1 0 .
6 Press and hold down OK to go to the next stage
Set the address of the entrance panel to which the door lock
code refers
7 Press and hold down OK to terminate the contact
entering

Bticino Sfera Series Specifications

General

Series	Sfera
Category	Control Unit
Storage Temperature	+70°C
Compatibility	2-wire system
Relative Humidity	95% (non-condensing)
Protection Degree	IP20