BuildClean 512000 - Preparing for Air Scrubber Use

© 2014 ITW Renovation & Remodeling, a Division of Illinois Tool Works Inc. 5
Preparing the Air Scrubber for Use
Unpacking the Air Scrubber
Find a level spot to unpack and assemble your
BuildClean HEPA 360° Air Scrubber.
When unpacking the machine, check that the air
scrubber and all its parts have not been damaged in
transport. Conrm that both the pre-lter and HEPA
lter are in place correctly.
Save the box and packing material. If you need to
ship the BuildClean HEPA 360° air scrubber to a job
site or return the product, using the original box and
packing material ensures that the air scrubber can
be transported without being damaged.
Views of unit showing locations of prelter (left) and HEPA lter (right)
BuildClean 360° Air Scrubber Checklist
of Parts
1. Air Scrubber Top Cover
2. Air Scrubber Base
3. Pre-Filter
4. HEPA Filter
5. Attached Short Power Cord
If the air scrubber or its parts have been
damaged or if there are any other concerns,
call BuildClean at (855) 595-2860.
WARNING
Check the power cord on the air scrubber to ensure it has not been damaged in transit. A damaged power
cord can cause electrical shock and personal injury. Do NOT operate an air scrubber with a damaged cord or
plug.