8
INSTALLATION INSTRUCTIONS (CONTINUED)
OUTDOOR NATURAL GAS SINGLE SIDE BURNER INSTALLATION
SPECIFICATIONS
NOTE:
- Vents must be provided for combustion air and ventilation on both sides of built-in cabinet.
- When choosing a location for your single side burner keep in mind that it should never be located under any overhead
combustible construction.
- The sides and back of the single side burner should not be any closer than 21 inches/54 cm/533 mm to combustible
construction.
- DO NOT store empty or full spare tanks under or near this or any other appliance.
- There must be a minimum of 6 inches/15 cm/152 mm counter space behind the single side burner in order to allow for
ventilation purposes.
To Next Page
