21
Introduction Harness Description OutLook Installation Pyrometer Probe Calibration Troubleshooting
CURRENT SETTINGS
Truck Selected:
03-05 5.9L Dodge w / BD Mod
Tire Size:
32 Inches
Emergency Power Cutoff:
1250˚F
CURRENT PEAKS
Boost: 0 PSI
Pyrometer Probe: 000˚ F
Horsepower 0.0 HP
Torque: 0.0 ft-lbs
0-60 Time: 0.00 Seconds
1/4 Mile Time: 0.00 Seconds
Choose Your Vehicle
03-07 6.0L Ford w/ BD Mod
03-07 6.0L Ford w/ other
99.5-03 7.3L Ford w/ other
01-05 GM w /BD Module only
01-05 GM w / other or Stock
03-05 Dodge w/ BD Module
03-05 Dodge w / other
OPERATING INSTRUCTIONS
Operating Instructions
MAIN MENU ITEMS
VIEW CURRENT SETTING: This feature allows you to see how
the OutLook has been set up to work with the vehicle. It will
display what truck type was selected, what the tire size was set
to and what the emergency de-fuel level is set to. This makes it
simple to make sure you have these standards set up correctly.
VIEW PEAK VALUES: This feature will show you all of the single
all time highs for your vehicle on a single screen.
CLEAR PEAK VALUES: This will enable you to erase the peak
values that are saved in the OutLook and displayed when you select the View Peak Values main menu op-
tion. Clearing the peak values will free up the OutLook to record new values lower than the previously saved
peaks.
VEHICLE SELECTION SCREEN: This is the same screen that ap-
pears when the OutLook gets installed for the first time. Use this
feature if the wrong setting is set or if the OutLook is transferred
to a different brand of vehicle.
To Next Page
Loading...
General