6
8045
ENGLISH
QUICKSTART
0......9
ENTER
Control of
4 mA
Control of
20 mA
Zero point
Calibration
Simulation of
the outputs
The unit is now ready
The mode Offset fixes the output
current of 4mA.
The mode Span fixes the output
of 20mA.
Put the displayed value at 0.00 in
the selected unit when the liquid
in the pipe is not moving.
This is optional although it is
recommended for commissioning
large systems.
2.3
To access the TEST MENU simultaneously press for 5 seconds.
2.3 TESTING
See Section 4.5.1
See Section 4.5.2
See Section 4.5.3
See Section 4.5.4
The actions which are highlighted in grey must be fully completed for
accurate measurement.
To Next Page
Loading...
