9
BURLEY.COM
ENG FRA ESP
ASSEMBLY & USE
8
Remove the Mounting Rails from the Mounting
Block by depressing the front face of the
Mounting Block
A
and simultaneously pull the
Mounting Rails out of the Mounting Block
B
.
Flip the Base Plate away from the Bicycle
Seat and remove it from the slots on
the underside of the Bicycle Seat.
Remove the Mounting Knob by lifting the
Locking Ring up away from the Bicycle
Seat
A
, and rotating the Mounting Knob
counter-clockwise until detached
B
.
Pass the Mounting Rails through the 2 holes
between the legs of the Bicycle Seat.
1
3
2
4
Attaching the Mounting Rails to Your Bicycle Seat
(Dash FM)
note
Pull both Mounting Rails from Mounting Block at the
same time for smooth removal.
note
The orientation of the Mounting Rails should be such
that they are bending downwards.
A
B B
A
To Next Page
Loading...
