4 - EN
Installer / Service Manual BURNiT Comfort PM/PM-B
end user must notify authorized service /installer BURNiT. It is not recommended to deactivate or
restart the safety functions of the product at your own.
You must have a fire extinguisher in the room where the pellet stove is installed in case of fire in the
exhaust gases tube.
2. Technical characteristics:
2.1 Delivery and unpacking the pellet stove
The pellet stove is delivered on wooden pallet, packed in carton box wrapped in foil and additionally
secured with packing strap.
Unpack carefully. Check the product for visible defects or damages. Check the door glass.
Open the container for pellets and check the availability of the following additional units:
Remote control - battery, 12V, type LRV 08 23A not included.
Controller + mounting screws set.
Bolt М5 set
Check the availability of Technical (instruction manual, service and warranty card). Read carefully the
documentation and do not throw away. In case of visual defect, damage or missing part notify immediately
your seller.
To Next Page
Loading...
