BURNiT PM 23kW - Technical Parameters

6 - EN
Installer / Service Manual BURNiT Comfort PM/PM-B
2.3 Technical parameters
Model PM / PM-B 15 kW 23 kW
Height
mm
930
1080
Width mm 585 585
Depth mm 555 555
Weight
kg
38
60
Inlet air tube, diameter mm 80 80
Exhaust gases tube
,
diameter
mm
140
160
Container for pellets
-
capacity
–
max. quantity
kg
22
30
Heating area, approximate value * m2 120 220
Nominal power
kW
15
23
Heat power /reduced power/ kW 3 3
Heat power
water jacket
12
20
Capacity of the water jacket
L
35
75
Working pressure Bar 2 2
Max
/
Min
fuel consumption per hour
h/kg
3/1.2
5/1.5
Time for burning
full container load pellets
Nominal power
Heat power
h 7.7
21,4
7.7
21.4
Efficiency - Nominal power
Heat power
% 90
80
92
86
Electrical power- ignition mode W 450 450
Supply voltage
V/Hz
230/50
230/50
Recommended fuel
Wood
-
pellets
,
diameter 6-8 mm,
EN 14961-2:2011
The values in the table above are presented on a test base, performed by burning wooden pellets
with calorific values Kj/kg (equal to 4350 Kcal/kg).
(*) Value depending on the installation parameters.
All the data above is informative and not obligatory. The manufacturer reserves his rights to
change the data at any time aiming to improve the efficiency of the pellet stove.