BURNiT PM 23kW - Functional Description

5 - EN
Installer / Service Manual BURNiT Comfort PM/PM-B
2.2 Functional description of the pellet stove
The pellet stove BURNiT Comfort PM - 15kW, 23kW with water jacket is designed to be connected to a
heating installation and is suitable for use in houses, offices, small restaurants etc. The product contributes
for the comfort and the nice atmosphere in the room. The combustion chamber is protected with big area
water jacket which contributes for its bigger efficiency. The burner is iron casted by special technology from
fire endurable alloy. The door of the pellet stove is sealed hermetically when closed. The ceramic glass of
the door is heat resistant – up to 700°C – and thanks to it you could safely watch the fire (the glass prevents
the contact with smoke or dangerous sparks of fire.)
The pellet stove BURNiT Comfort PM-В - 15kW, 23kW with water jacket and insulated metal front door is
designed to be connected to a heating installation and could be installed in well isolated and protected
from freezing rooms (balcony, garage, garden house etc.) You save living space with this comfortable
decision. It is obligatory to insulate the pipes from and to the water jacket of the pellet stove!
The combustion chamber is protected with big area water jacket which contributes for its bigger efficiency.
The burner is iron casted by special technology from fire endurable alloy. The door of the pellet stove is
sealed hermetically when closed. The metal front door is well insulated in order to reduce at minimum the
expected heat losses.
Elements of the pellet stove
A- Cover of the container for pellets N – Container for ash
V
-
Controller
I
-
Double steel of the burner
S - Container for pellets L - Burner
F
–
Ceramic glass
/
for models
PM/
or metal
insulated door for model РМ-В/
P
–
Electrical power
G
–
Door lock
R
–
Decorative steel cases