Need help?Do you have a question about the Busch-Jaeger Prasenz tech 6813-101 and is the answer not in the manual?
Details the intended use and compatible devices for the Presence Detector.
Outlines adherence to directives and applicable country regulations.
Refers to other instructions and provides cleaning guidance for the device.
Specifies correct usage and requirements for proper disposal of materials and devices.
Describes clipping the detector onto the FM Insert and installation box types.
Factors to consider when choosing the location for mounting the detector.
Details how to adjust the detection range using a provided masking strip.
Instructions for installing the detector in a surface-mounted housing (Art. No. 6885).
Guidance for operating the detector in conjunction with extensions.
Steps required to detach the Presence Detector from the FM Insert.
Describes the two main outputs: "Lighting" and "Präsenz" and their functions.
Explains the function and settings of the "Time/Light", "Time/HAV", and "Lux" potentiometers.
Details how the brightness sensor and "Lux" potentiometer control lighting based on ambient brightness.
Explains the "Time" potentiometer's role in determining how long lights stay on after movement ceases.
Describes how the "Time/HAV" potentiometer controls the switch-on delay for HAV systems.
Explains the "Time/HAV" potentiometer's function for switch-off delay in HAV systems.
Guides users on activating and using the test mode to check device functionality and detection range.
Details the Master/Slave mode for extended monitoring and compatible device combinations.
Explains the comfort mode for maintaining a constant brightness level using dimming.
Describes how to control the lighting system using an external NO-contact pushbutton.
Explains how to operate the Presence Detector using the IR hand-held transmitter 6010.
Details the device's behavior when power is restored after an interruption.
Lists common causes and remedies for the load-relay failing to switch.
Lists common causes and remedies when the Presence Detector does not respond.
Addresses situations where the detector activates without apparent movement.
Explains causes and solutions for the detector switching off while movement is present.
Outlines the duration and what is covered under the product warranty.
Specifies conditions not covered by the warranty and limitations on claims.
Provides instructions for returning the device for warranty claims.
General| Brand | Busch-Jaeger |
|---|---|
| Model | Prasenz tech 6813-101 |
| Category | Security Sensors |
| Language | English |
To Next Page