GB
107
a. In conjunction with 6813-101 and all switch inserts
Control via the "ON" and "OFF" pushbuttons of the remote control is identical to control as
described in Chapter 7.1.
In addition, the brightness limit value can be changed via the IR Manual Transmitter. To do
this, proceed as follows:
Lighting is on
• Press OFF briefly: The lighting will be switched off.
• Press MEMO twice: A higher brightness limit value will be stored.
The Presence Detector immediately accepts the value.
Lighting is off
• Press ON briefly: The lighting will be switched on.
• Press MEMO twice: A lower brightness limit value will be stored.
The Presence Detector immediately accepts the value.
Operation
To Next Page
Loading...