BUSCH COBRA - Page 25

Electrical Connection | 6
Instruction Manual COBRA NC 2500 B WCV_EN_en 25 | 52
Part no.: Vibration sensor “CTC”: 0658 569 597 + Diagnostic electronics VSE100
Supplier reference:
Vibration sensor “CTC”: Connection Technology Center (CTC) AC915-9C
Diagnostic electronics IFM VSE100
Maintenance procedure: Vibration Sensor Calibration [➔38]
P&ID position: SA+/0701
Electrical data: U = 24 VDC ; I = 200 mA
Normal operation Warning signal Trip signal
Digital output I/O 1 24 V (100 mA) 0 V 0 V
Output 2 24 V (100 mA) 24 V (100 mA) 0 V
Output 1 analog signal 4-20 mA 4 to 15 mA >15 to 18 mA >18 mA