BUSCH COBRA - Product Description; Component Identification

Product Description | 2
Instruction Manual COBRA NC 2500 B WCV_EN_en 5 | 52
2 Product Description
CLV2
MP OSGODV
TSA2
OFP
CWIPHE CLPCWOCLD
INCLG
MTB
CLV1
CLF
OUT
EB EBCGU
MP OFP
OSG
OUTSI
ODV
CD
TSA1
SANP
TMBGS
ECP
TV
MP
Description
IN Suction connection (Inlet) with mesh screen OUT Discharge connection (Outlet)
BGS Barrier gas system CD Condensate drain
CGU Cooling gas unit (air filter included) CLD Cooling liquid drain plug*
CLF Cooling liquid fill plug CLG Cooling liquid sight glass
CLP Cooling liquid pump CLV1 Cooling liquid vent plug (cooling liquid
pump)
CLV2 Cooling liquid vent plug (machine) CWI Cooling water inlet
CWO Cooling water outlet EB Eye bolt
ECP Earth connection MP Magnetic plug
MTB Motor terminal box NP Nameplate
ODV Oil drain valve OFP Oil fill plug
OSG Oil sight glass PHE Plate heat exchanger
SA Vibration transmitter (option) SI Silencer (option)
TM Thermometer TSA1 Resistance thermometer (cooling liquid tem-
perature)
TSA2 Resistance thermometer (exhaust gas tem-
perature)
TV Thermostatic valve
*For additional cooling liquid drain plugs (CLD), see Cooling Liquid Change [➔34].