EasyManua.ls Logo

BUSCH COBRA - UK Declaration of Conformity

BUSCH COBRA
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17 | UK Declaration of Conformity
48 | 52 Instruction Manual COBRA NC 2500 B WCV_EN_en
17 UK Declaration of Conformity
This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Dec-
laration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the UKCA-marking.
The manufacturer Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine: COBRA NC 2500 B
fulfill(s) all the relevant provisions from UK legislations:
Supply of Machinery (Safety) Regulations 2008
Electromagnetic Compatibility Regulations 2016
Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2021
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009 Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Chevenez, 25.01.2022
Christian Hoffmann, General Director

Related product manuals