BUSCH MV 1202 B - EU Declaration of Conformity

15 | EU Declaration of Conformity
28 | 32 Instruction Manual_MINK MV 1202 B_EN_en
15 EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla-
ration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the CE-marking.
The manufacturer is determined by the serial number:
Serial number starts with CHM1… Serial number starts with DEM1…
Ateliers Busch S.A.
Zone industrielle
2906 Chevenez
Switzerland
Busch Produktions GmbH
Schauinslandstr. 1
79689 Maulburg
Germany
declares that the machine: MINK MV 1202 B
fulfill(s) all the relevant provisions from EU directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ (EMC) 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amend-
ments)
and comply(-ies) with the following harmonized standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009 Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file and authorized representative in the EU (if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Chevenez, 01.03.2023 Maulburg, 01.03.2023
Christian Hoffmann
General Manager
Ateliers Busch S.A.
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH