Why BUSCH RA 0205 D has abnormal oil consumption?
Abnormal oil consumption in your BUSCH Water Pump can stem from a few issues: oil leaks (contact Busch to replace seals), a malfunctioning float valve (FV) (contact Busch to check and repair the float valve and oil return line), or running the machine at atmospheric pressure for an extended period (ensure the machine operates under vacuum).
Why BUSCH RA 0205 D fumes or expels oil?
If your BUSCH Water Pump is fuming or expelling oil droplets, it could be due to: partially clogged exhaust filters (EF) – replace them; an exhaust filter (EF) with o-ring not fitted properly – ensure correct positioning; or a malfunctioning float valve (FV) – contact Busch for repair.
Why is the oil in my BUSCH RA 0205 D emulsified?
If the oil in your BUSCH Water Pump is emulsified, it might be because the machine sucked in liquids or significant amounts of vapor, in which case you should contact Busch to flush the machine. Also, clean the filter of the gas ballast valve (GB). Consider modifying the operational mode.
Defines hazard levels (Danger, Warning, Caution, Notice, Note) and types of safety messages used in the manual.
Explains ATEX classification requirements and the safety measures implemented for potentially explosive environments.
Specifies environmental and site requirements for safe and efficient machine installation, including ATEX compliance.
Covers essential safety and procedural steps for connecting the machine's electrical components, including grounding and overload protection.
Outlines critical steps and precautions for safely starting up and operating the machine for the first time.
Details the recommended maintenance tasks and their intervals for normal and harsh operating conditions.
Provides instructions for checking oil levels and performing oil and oil filter changes.
Addresses common problems like the machine not starting or not reaching pressure, with causes and remedies.
Solves issues related to noise, overheating, oil consumption, and emulsification.
General| Type | Rotary vane vacuum pump |
|---|---|
| Ultimate pressure | 0.1 mbar |
| Motor nominal power | 5.5 kW |
| Weight approximately | 340 kg |
| Oil capacity | 12 l |
| Nominal motor speed | 1500 min⁻¹ |
| Gas inlet | DN 10 KF |
| Frequency | 50 Hz |
| Inlet connection | G 2 |
To Next Page
