BUSCH TYR WT 0100 CV User Manual

4 | Storage
10 | 44 Instruction Manual TYR WT 0100-0730 CP CV_EN_en
4 Storage
● Seal all apertures with adhesive tape or reuse provided caps.
If the machine is to be stored for more than 3 months:
● Wrap the machine in a corrosion inhibiting film.
● Store the machine indoors, in a dry and dust free environment and if possible, in original pack-
aging, preferably at temperatures between 0 ... 20 °C.
NOTICE
Long storage time (over 6 months).
The blower shaft should be rotated by hand periodically, at least once every 3 months, in or-
der to renew the grease on the bearing races and keep a periodical record. Failure to carry out
this procedure could invalidate the product warranty.
● Very important is to rotate the blower shaft by hand at least during the installation, just before
starting up the machine.
NOTICE
Long storage time (more than 6 months).
For long storage time or storage in a warehouse with substantial fluctuations in temperature
and/or an aggressiv atmosphere, the rotary lobe blower must be prepared in a special proce-
dure from Busch Vyroba CZ s.r.o. (according to customer information during order prepara-
tion).
All specific preparations and procedures must be preserved during a storaging all the time.
The rotary lobe blower must be wrapped in a special VCI foil all the time during storaging.

BUSCH TYR WT 0100 CV Specifications

General

Brand	BUSCH
Model	TYR WT 0100 CV
Category	Blower
Language	English