BUSCH TYR WT 0100 CV User Manual

Installation | 5
Instruction Manual TYR WT 0100-0730 CP CV_EN_en 11 | 44
5 Installation
5.1 Installation Conditions
NOTICE
Use of the machine outside of the permitted installation conditions.
Risk of premature failure!
Loss of efficiency!
● Take care that the installation conditions are fully complied with.
● Make sure that the environment of the machine is not potentially explosive.
● Make sure that the ambient conditions comply with the Technical Data [➔36].
● Make sure that the environmental conditions comply with the protection class of the motor and
the electrical elements.
● Make sure that the installation space or location is protected from weather and lightning.
● Make sure that the installation space or location is vented such that sufficient cooling of the ma-
chine is provided.
● Make sure that cooling air inlets and outlets are not covered or obstructed and that the cooling
air flow is not affected adversely in any other way.
● Check the oil level, see Oil Level Inspection [➔25].
● Make sure that all provided covers, guards, hoods, etc. are mounted.
● Make sure that the machine is secured against movement.
5.2 Blower Unit Installation
The machine must be set up horizontally on a flat surface.
Maximum permissible unevenness of the base / inclination of the machine can be expressed as fol-
lows:
● View from left to right and the front to back : max. 0.5°
We recommend to keep 1 meter space around the machine for the maintenance work.

BUSCH TYR WT 0100 CV Specifications

General

Brand	BUSCH
Model	TYR WT 0100 CV
Category	Blower
Language	English