EasyManua.ls Logo

Bush CDAB51RR - DLS (Dynamic Label Segment); Program Type; Ensemble;Multiplex (Group Name); Time & Date

Bush CDAB51RR
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
DAB OPERATION DAB OPERATION
4 DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that the broadcaster may include with
their transmissions. This message usually includes information, such as program
detail etc.
5 Program type
This describes the “Style” or “genre” of music that is being broadcast e.g. “Rock “or
Classical”.
6 Ensemble/Multiplex (Group name)
A multiplex/ensemble is a collection of radio stations that are bundled and transmitted
on one frequency. There are national and local multiplexes. Local ones contain
stations that are specic to that area e.g. MXR West.
NOTE: DAB – unlike normal radio, groups together several radio stations and
transmits them on one frequency.
7 Time & Date
The time & date can be set automatically from the DAB broadcast or set manually.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Full Scan> option appears press either or and nd <System>.
3. Press the ENTER button, use the / buttons to nd <Time> and press ENTER.
Inside the <Time> menu there are several options. <Set 12/24 Hour>, <Set Time/
Date>, <Set Date Format> & <Auto Update>.
<Set 12/24 Hour> Use the / buttons to select 12 or 24 hour and then press the
ENTER button to activate.
<Set Time/Date> When activated the Hour digit ashes, use the / buttons to set
the digit to the correct hour then press ENTER, repeat for the minutes again pressing
ENTER when set.
The process for setting the date is exactly the same as the above. Press ENTER to
nalise the setting once complete.
<Auto Update> Use the / buttons to cycle through the various options for auto
setting the time & date. These range from. <Update from any>, < Update from DAB>,
< Update from FM> and <No Update>.
NOTE: When the power is switched OFF ( not standby ) the settings will be lost.

Related product manuals