EasyManua.ls Logo

Bush CSPK200 - Power Source Safety; Moisture and Water Precautions

Bush CSPK200
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety information
6
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Safety information
Important - Please read these instructions fully before
installing or operating
Power source
This symbol means that this unit is double insulated. An earth connection is
not required.
The appliance must be connected to a 220-240 volt 50/60Hz AC supply by
means of a three pin socket.
Unplug this apparatus during lightning storms or when unused for long
periods of time - to prevent damage to this product.
Opening or removing covers may expose you to dangerous voltages or other
hazards.
To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
Use suitable power sources - Plug the product into a suitable power source, as
described in the operating instructions or as marked on the product.
The supply voltage should be the same as that indicated in the technical
specifications and the appliance rating plate.
If the socket outlets in your home are not suitable for the plug supplied with
this unit check with a qualified electrician for replacement.
In order to disconnect the apparatus from the mains completely, switch off
the outlet and remove the mains plug completely.
Do not bend, stretch or pull the supply cable in order to avoid electric shock.
When installed, the power socket must be within easy reach.
Moisture and water
Do not use this apparatus near water or moisture.
Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in
a wet basement, near a swimming pool, or anywhere else that water or moisture is
present.

Related product manuals