Bush DAB820 - Tune to a DAB Station Preset; DAB Display Information

Using your All in One Micro HiFi
Let’s get started
Using your All in One Micro Hi-Fi
24
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Tro ubles hoot ing
Note: If there is already an existing DAB station stored under a preset, it will be over
written when you store the new station.
Tune to a DAB station preset
In DAB mode:
1. Press and release the Preset button. ‘Preset Recall’ is displayed together with the preset
list.
2. Use the left hand rotary control to scroll to the Preset location and station that you
would like to listen to (1-10).
3. Press the left hand rotary control to Select. The Micro will instantly tune to that station
and begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will be
displayed, then the Micro will revert to the previously selected radio station after a few
seconds.
DAB display information
When listening to a DAB station you can change the information that will appear on the
display. There are several different types of information that are sent by the broadcaster.
• Dynamic Label Segment (DLS)
This is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or music title, DJ’s name, contact details for the radio station etc.
• Program Type (PTY)
Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Multiplex Name
Displays the broadcasting area and collection of radio stations on this frequency e.g.:
BBC National DAB, Digital 1 Network.