• Skip back
Press and release to skip back to the previous track..
• Skip forward
Skip forward. Press and release to skip forward to the next track.
Delete all paired Bluetooth device records
Press and hold the button to delete all the Bluetooth device records from your Micro.
Disconnected will be displayed. See page 33 to connect or ‘pair’ a new device with your
Micro.
Note: If you do not use or pause your Micro for approximately 30 minutes and no
audio signal is received, it will automatically go to Standby mode.
Auxiliary Input mode
Check that your Micro is in Auxiliary input mode. If you are not already in Auxiliary input
mode, briefly press and release the Mode button until you are in Auxiliary input mode
(check the display).
Using a 3.5mm audio input connection cable (not included), Auxiliary input allows for a
quick and easy connection to an external sound source.
1. Connect one end of the 3.5mm audio connection cable to the headphone (or
auxiliary out) socket of your secondary device, connect the other end to the Aux in
socket on the front of your Micro.
2. Press the Play button on your external device to start playback through the Micro
speakers.
To gain optimal volume levels, adjust the output volume level on both the secondary
device and on the Micro.
Note: It is recommended that you unplug the Audio cable from the Line in socket after
you have finished listening to your external device.
To Next Page
Loading...
