Bush DAB820 - Page 31

Using your All in One Micro HiFi
Let’s get started
Using your All in One Micro Hi-Fi
31
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
• Next track:
Press and release the button.
• Previous track:
Press and release the button.
• Fast forward within a track:
Press and hold the button.
• Fast backward within a track:
Press and hold the button.
• Stop
Press and release the button
Programmed play mode
In programmed play mode, you can program the play order of the tracks on your CD.
You can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1. Press and release the Preset button to enter CD programmed play mode. ‘Pro P01
T00’ will be displayed and the two zeros after the ‘T’ will flash.
2. Use the or buttons to go to the track number that you would like to program
to play first. Press and release the Preset button to confirm.
3. ‘Pro P02 T00’ will now be displayed and you can select the second track that you
would like to programme. Continue to select each track as in Step 2 above, up to a
total of 20 tracks.
4. Press and release the button to play the programmed tracks.
5. To exit programmed play mode, press and release the button twice.