23
Using your All-in-one System
Let’s get started
Language:
You can set the menu language under LANGUAGE.
In working mode, long press Menu into System setting or Main Menu, then rotate the dial to
select Language and press the “Enter” button to confirm.
English, French, Deutsch, Italiano, Norsk, Polski, Portugues, Espanol, Svenska, Turkce, Dansk,
Nederlands, Suomi.
Factory reset:
SW Update:
update the software in your device, for factory use only.
SW version:
Press the “Enter” button to view the system software version if need.
To restore the factory settings of the device, please proceed as follows:
In radio mode, press and hold the MENU button until System setting appear on the display.
Rotate the dial to select the FACTORY RESET submenu.
Press the “Enter” button and confirm the subsequent prompt with YES.
The device is then reset to the factory settings, which means all alarm times, sleep timers,
etc. are lost.
To Next Page
Loading...
