EasyManua.ls Logo

Butterfly M21 - Page 11

Butterfly M21
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
2.1
Press the "power switch" on the "0" side, the power is turned off.
2.2
Insert the "foot control plug" into the corresponding jack in the
picture above; insert the "AC adapter plug" into the corresponding
jack in the picture above.
2.3
Insert the "AC adapter" into the "220V power socket", then press the "power
switch" at "1", the power is turned on.
2.4
Turn the "speed adjustment switch" to the "STOP" position, and use the "foot switch" to
operate; the
specific sewing speed and slowness are shown in the following figure:
Press the foot switch with the foot down, the sewing speed will display different speeds
according to the different positions of the foot, the faster the lower the speed; the slower
the speed in the middle; the sewin speed can be switched according to the different
pressing force.
2.1 Tekan "saklar daya" di sisi "0", daya dimatikan.
2.2 Masukkan "steker kontrol kaki" ke jack yang sesuai pada gambar di atas; masukkan
"colokan adaptor AC" ke jack yang sesuai pada gambar di atas.
2.3 Masukkan "adaptor AC" ke dalam "soket daya 220V", lalu tekan "saklar daya" di "1", daya
dihidupkan.
2.4 Putar "saklar penyesuaian kecepatan" ke posisi "BERHENTI", dan gunakan "saklar kaki"
untuk mengoperasikannya; kecepatan dan kelambatan menjahit spesifik ditunjukkan pada
gambar berikut:
Tekan sakelar kaki dengan kaki ke bawah, kecepatan menjahit akan menampilkan
kecepatan yang berbeda sesuai dengan posisi kaki yang berbeda, semakin cepat semakin
rendah kecepatannya; semakin lambat kecepatan di tengah; kecepatan menjahit dapat
diaktifkan sesuai dengan gaya tekan yang berbeda.
Step on foot control and the machine will start.
Step on the pedal lightly, the sewing speed of the machine
is slow.
Step on the pedal deeply, the sewing speed of the
machine is faster.
Stop stepping on the pedal, the sewing machine will
stop.
Injak kontrol kaki dan mesin akan mulai.
Injak pedal dengan ringan, kecepatan menjahit mesin lambat.
Injak pedal dalam-dalam, kecepatan menjahit mesin lebih cepat.
Berhenti menginjak pedal, mesin jahit akan berhenti.

Related product manuals