7.
1 Using the presser foot function
Menggunakan fungsi kaki penindas
Attention！
perhatian!
When operating, please pay attention to the needle
to avoid bruising your hands.
Saat mengoperasikan, harap perhatikan jarum
untuk menghindari memar pada tangan Anda.
You can move the "Presser Foot Lever" up to lift the
presser foot, the machine has 2 height gears.
When sewing the fabric, the thickness of the fabric
should not be higher than the thickness of "Height 1".
When sewing fabrics, please lower the presser foot before
sewing.
Anda dapat memindahkan "Tuas Kaki Presser" ke atas
untuk mengangkat kaki penindas, mesin memiliki 2
roda gigi ketinggian.
Saat menjahit kain, ketebalan kain tidak boleh lebih tinggi
dari ketebalan "Tinggi 1".
Saat menjahit kain, harap turunkan sepatu penindas
sebelum menjahit.
7. 2 Removing the presser foot set
7. 2 Melepas set sepatu penindas
black button
Attention！
Perhatian!
1.To do this, you need to set the power switch to
"off" first
2.When operating, please pay attention to the
needle to avoid bruising your hands.
1.Untuk melakukan ini, Anda perlu mengatur sakelar
daya ke "mati" terlebih dahulu
2. Saat mengoperasikan, perhatikan jarum untuk
menghindari memar pada tangan Anda.
Turn the handwheel counterclockwise first so that the
needle is at the highest position.
Pull the "press foot lever" to raise the press foot group.
Press the "black button" on the rear of the foot holder,
and the "presser
foot holder" will be separated from the
"presser foot group"
7. Presser foot function and loading and unloading/Fungsi Presser foot dan
bongkar muat
height2
To Next Page
Loading...
