7.5
Removing and installing the bobbin
Melepas dan memasang bobbin
Lift the needle
Bobbin cover
push back
Turn the handwheel clockwise first so
that the needle is in the highest position.
Push the "Bobbin cover" back.
Putar handwheel searah jarum jam terlebih dahulu
agar jarum berada pada posisi tertinggi.
Dorong kembali "Penutup kumparan".
1.
To do this, you need to set the power switch to
"off" first。
2.When operating, please pay attention to the
needle to avoid
1. Untuk melakukan ini, Anda perlu mengatur
sakelar daya ke "mati" terlebih dahulu。
2. Saat beroperasi, harap perhatikan jarum untuk
menghindari
Remove the bobbin cover and use
your fingers to take out the bobbin.
Lepaskan penutup bobbin dan gunakan
jari Anda untuk mengeluarkan bobbin.
To Next Page
Loading...
