20EN
sales@ibuture.com
MAINTENANCE
TROUBLESHOOTING
01. The lter can be cleaned with warm water. After cleaning, it must be
thoroughly dried before use. Do not immerse the main unit in water or
any liquid.
02. Clean the vacuum cleaner casing only with a soft, slightly damp cloth.
03. Do not allow any liquid substances to enter the vacuum cleaner.
04. Do not use any corrosive chemicals or abrasives.
05. It is recommended to change the HEPA lter every 2 months (depending
on use) to ensure optimum performance. Do not use the HEPA lter or
metal lter when it is damaged or worn out.
If there is any problem during use, please check the following troubleshooting
table.
If the problem can't be solved, please contact the after-sales email:
sales@ibuture.com.
Warning:
Turn off the vacuum cleaner before maintenance. Otherwise it may
cause electric shock or other personal injury.
Blockage Protection:
When the vacuum cleaner is blocked, it will automatically
stop working, then the three indicator lights will light up 5
times at the same time.
Please clean the dust cup, filter, telescopic tube and floor
brush thoroughly and promptly.
To Next Page
Loading...
