GasAlertMicroClip
Pushbuttons
5
Pushbuttons
Pushbutton Description
C
• To activate the detector press C.
• To deactivate the detector, press and hold C until the OFF countdown is complete and the
LCD deactivates.
• To view the TWA, STEL, and maximum (MAX) hold readings, press C twice. To clear the
TWA, STEL, and MAX readings, press C when the LCD displays RESET.
• To initiate calibration, press and hold C as the detector executes the OFF countdown and
continue to hold C as the LCD briefly deactivates and then executes the CAL countdown.
Release C when the CAL countdown is complete.
• To activate the backlight, press C.
• To acknowledge latched alarms, press C.
• To acknowledge a low alarm and disable the beeper, press C (if Low Alarm Acknowledge user
option is enabled).
To Next Page
Loading...
