BWT PRO A 22 - Page 50

2021/03 - Indice de révision : B Code : 29740 TRAITEMENT DE L'EAU
50/88
Automaticmode(withtimer):
Inthismodethelightswillonduringtheprogrammedintervals(start/
stoptimes),thatwillrepeatatafrequencyselectedbytheuser:
-everyday,
-every2days,
-every3days,
-every4days,
-every5days,
-everyweek,
-every2weeks
-every3weeks
-every4weeks
Selectingthetimeinterval:
1.PresstheDownkeytonavigatetothetimeinterval.
2.UsethePlus/Minuskeystoaccessthestarttimehours:select
thehourusingthePlus/Minuskeys.
3. Use the Up key toaccess the start time minutes eld:set the
minutesusingthePlus/Minuskeys.
4.PressOKtoconrmorEscapetocancel.
Selectingthefrequency:
5.UsetheDownkeytonavigatetofrequency.
6.UsetheUp/Downkeystoaccessfrequencysetting.
7.SelectthefrequencyusingthePlus/Minuskeys
8.PressOKtosaveorEscapetocancel.Proceedinthesameway
tosetthestoptime.
SelectingtheLEDunderwaterlightcolourchangemode:
If colour LED underwater lights are installed, the colour change
sequencecanbecontrolled.
By activating the Next Program option, the LED light will change
fromthecurrentstaticcolourtothenext,thePulseLengthmenuitem
setsthefrequencyoftheautomaticcolourchangeinseconds.The
colourswillchangeintheorderprogrammedbythemanufacturerof
theunderwaterlight.