Need help?Do you have a question about the BWT PRO A and is the answer not in the manual?
Guidelines for safe installation and operation of the chlorine generator, focusing on user protection.
Explains the core function of the chlorine generator in pool water treatment.
Details the operating principle for the Pro A model using salt electrolysis.
Explains the Pro LS model's dual method: salt electrolysis and water hydrolysis.
Lists the functions and optional kits available for the PRO A and PRO LS chlorine generators.
Details the process of connecting the chlorine generator to the pool's hydraulic system.
Instructions for physically installing the control panel unit on a wall.
Steps for connecting the control panel to the cell and other electrical components.
Guide to setting up the device's display, language, time, and other system parameters.
How to select and adjust chlorine production levels for different operating modes.
Instructions for calibrating sensors and setting measurement parameters.
Detailed steps for calibrating pH, Redox, and temperature sensors.
Configuration options for controlling the filtration pump's operation.
Procedure for performing back-washing and rinsing of the pool filter.
How to control and manage the pool's underwater lighting system.
Steps to connect and configure the Wi-Fi module for remote monitoring.
Physical installation guide for the optional Wi-Fi module.
Instructions for programming the variable speed pump's operational settings.
Procedures for cleaning, inspecting, and maintaining pH and Redox sensors.
Inspection and replacement of the peristaltic pump's compression tube.
Steps to remove scale buildup from the electrolysis cell electrodes.
Procedures for preparing the device for winter shutdown to prevent damage.
Detailed steps for passive winterization of the pump, cell, and sensors.
Guidelines for active winterization, keeping equipment in place with specific operational conditions.
Guidelines for safe installation and operation of the chlorine generator, focusing on user protection.
Explains the core function of the chlorine generator in pool water treatment.
Details the operating principle for the Pro A model using salt electrolysis.
Explains the Pro LS model's dual method: salt electrolysis and water hydrolysis.
Lists the functions and optional kits available for the PRO A and PRO LS chlorine generators.
Details the process of connecting the chlorine generator to the pool's hydraulic system.
Instructions for physically installing the control panel unit on a wall.
Steps for connecting the control panel to the cell and other electrical components.
Guide to setting up the device's display, language, time, and other system parameters.
How to select and adjust chlorine production levels for different operating modes.
Instructions for calibrating sensors and setting measurement parameters.
Detailed steps for calibrating pH, Redox, and temperature sensors.
Configuration options for controlling the filtration pump's operation.
Procedure for performing back-washing and rinsing of the pool filter.
How to control and manage the pool's underwater lighting system.
Steps to connect and configure the Wi-Fi module for remote monitoring.
Physical installation guide for the optional Wi-Fi module.
Instructions for programming the variable speed pump's operational settings.
Procedures for cleaning, inspecting, and maintaining pH and Redox sensors.
Inspection and replacement of the peristaltic pump's compression tube.
Steps to remove scale buildup from the electrolysis cell electrodes.
Procedures for preparing the device for winter shutdown to prevent damage.
Detailed steps for passive winterization of the pump, cell, and sensors.
Guidelines for active winterization, keeping equipment in place with specific operational conditions.
General| Brand | BWT |
|---|---|
| Model | PRO A |
| Category | Water Filtration Systems |
| Language | English |
To Next Page