BWT PRO A - ERROR AND WARNING MESSAGES

2021/03 - Indice de révision : B Code : 29740TRAITEMENT DE L'EAU
55/88
9. APPENDIX 1 - ERROR AND WARNING MESSAGES
Error code Description
P1/P2 Celloperatingpolarity.Thecellautomaticallyinversesitspolaritytocleanitself.
Lgt Theunderwaterlightislit
Cov
Thecoversensorindicatesthatthecoverisclosed.Chlorineproductionisautomatically
reducedtothevaluesetintheElectrolysismenu.
F1 Noowintheinstallation.Checktheowsensorsandmakesurethatthepressureiscorrect.
Low
Thedevicecannotreachthedesiredproductionlevel.Thiscouldbeduetoseveralfactors:
-lackofsalt
-buildupofscaleinthecell,
-endofcellservicelife(checkthecounter)
-watertemperatureislow
AL3
Maximumaciddosingtimeexceeded.MeasurethepH,calibrationandmakesurethattheacid
storagetankisnotempty.Toresetthealarm,presstheBackkey.