Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
Enter OLT PON board(Apply to
box OLT FD1204S 、 FD1208S 、
FD1216S all default is 0/0)
OLT(config)# interface epon 0/ <SlotID>
Example:OLT(config)# interface epon 0/1 ---Enter slot 1
Enter OLT PON board(apply to
Plug-in card OLT FD8000-L116)
Enter OLT uplink(ge) board(In
default,box OLT all is 0/0)
View OLT uplink(ge) and PON port
vlan(The premise is we need enter
the board card mode.)
show port state <Port ID>
View OLT uplink port and PON port
status(The premise is we need
enter the board card mode.)
View OLT software version
View OLT mode and other
information
View OLT outband Manage IP
show interface vlanif brief
View OLT inband Management
IP(The premise is we need have
vlanif interface)
View OLT running configuration
View OLT have saved configuration
show ont info 0/0 <Port ID> all
View ONU register status in PON
port
show ont info 0/0 <Port ID> <ONT ID>
View ONU details information
show ont autofind <Port ID>
View autofind but unregistered
ONU in PON port(The premise is
we need to enter the PON board
mode)
show ont optical-info <Port ID> <ONT ID>
View ONU optical information
show ont port state <Port ID> <ONT ID> eth <ONT Port ID>
View ONU port status(The premise
is we need to enter the PON board
mode)
Concluding Remarks
Thanks for using products of Shenzhen C-Data Technology Co. Ltd.
Contact Information: