C-Data FD704GW - IPTV Configuration; IGMP Proxy Configuration; IGMP Snooping Configuration; IGMP Snooping Parameters

To Next Page

To Previous Page

2.5 IPTV Configuration

2.5.1IGMP Proxy

In the WAN Connection creating page, you can enable the IGMP Porxy when the WAN

Connection is not setting to bridging.

2.5.2 IGMP Snooping

In the Advanced Setup >LAN , you can configure the IGMP Snooping.

Standard Mode: Before the IGMP Report send, the multicast data will send to all bridging port,

and after the IGMP Report have sent, only the ports in the IGMP Report can receive multicast.

Blocking Mode: Only after the IGMP Report sent, the Report Port can receive multicast.

2.5.3 IGMP Snooping

You can set the IGMP Version, Query Interval, Maximum Multicast Groups in this page.