Need help?Do you have a question about the C-Data FD704GW and is the answer not in the manual?
General| Brand | C-Data |
|---|---|
| Model | FD704GW |
| Category | Touch terminals |
| Language | English |
Describes the application scenarios of the ONT device.
Details the interfaces and technical features of the ONT.
Illustrates the physical ports and connectors on the ONT device.
Explains the status indicated by each LED on the ONT.
Lists the environmental specifications, such as operating temperature and humidity.
Details the steps to prepare your PC for accessing the ONT's web interface.
Guides on how to log in to the ONT's web management interface using default credentials.
Explains how to configure the ONT's authentication mode for OLT registration.
Details how to configure the LAN port work mode and IP settings.
Introduces WAN configuration in route and bridge modes.
Step-by-step guide to add a PPPoE WAN connection, including credentials and gateway.
Guides on adding an IP over Ethernet (IPOE) WAN connection and IP mode.
Explains how to configure a WAN connection in bridging mode.
Enables IGMP Proxy for IPTV services.
Configures IGMP Snooping for efficient multicast traffic handling.
Sets IGMP Version, Query Interval, and multicast group parameters.
Configures fundamental wireless LAN settings like SSID and security.
Guides on configuring network authentication, encryption, and passphrase.
Shows how to display the configured WPA/WAPI passphrase.
Explains how to set or change the wireless password.
Configures WiFi Protected Setup (WPS) for wireless connection.
Sets MAC address restrictions for wireless access.
Configures wireless bridge features and restrictions.
Adjusts advanced wireless parameters like beacon interval and channel.
Displays information about authenticated wireless stations.
Resets the equipment settings to factory defaults.
Guides on upgrading the device's software version.
Initiates a reboot of the equipment.
To Next Page