16
Selected wireless -> security, you can to configure security features of the wireless LAN
interface, You may setup configuration manually or through WiFi Protected Setup(WPS)
Note: When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access
Point enabled or Mac filter list is empty with" allow" chosen, WPS2 will be disabled
2.6.2.1 Display WPA/WAPI passphrase
Selected wireless -> security -> WPA/WAPI passphrase-> Click here to display
2.6.2.2 Setting wireless password
Selected wireless -> security -> WPA/WAPI passphrase -> Enter a new password,
Click "Apply/Save" to configure the wireless options.
To Next Page
Loading...
Need help?
General