The line-limit tube
Removing and replacing the line-limit tube
It is strongly recommended that only genuine C-MAX line-limit tubes are used. Silicone tube is
available in various diameters, thicknesses and grades, and a repair or a substitute may not work as
intended. An unreliable limiting action could result in equipment damage.
To remove the tube, first slacken the gland nut and extract the tapered grommet which it has been
gripping. Pull the grommet off the end of the line past the suspension loop in the line where the
shackle is normally attached. Follow this by removing the gland and tube via the same route.
To Next Page
Loading...