CAB e4 Series - Operation Basics; Power Switch; The Front Panel; Indicator Lamps

cab Produkttechnik GmbH & Co KG
20
PRODUCT MARKING AND BARCODE IDENTIFICATION
20
Operation Basics
Power Switch
The power switch is on the left side of the printer. The symbol on the
switch is defined as follows:
ON
OFF
The Front Panel
The Front Panel of the printer consists of :
- Three Indicator Lamps: MEDIA, READY and RIBBON
- Three dual function buttons: PAUSE, FEED and CANCEL
Indicator Lamps
The three lamps indicate the status of the printer (please refer to Chapter
4 for error indications).
READY - Solid on: Indicates the printer is in normal state.
MEDIA - Solid on: Indicates the printer is in normal state.
- Blinking along with READY: Running out of media.
- Blinking individually: Indicates the printer is in the ‘PAUSE’ state.
RIBBON - Solid on: Indicates thermal transfer printing .
- Off: Direct thermal printing (no ribbon installed).
- Blinking along with READY: Running out of ribbon.