CAB e4 Series - Chapter 1 Introduction; Printer Specifications

cab Produkttechnik GmbH & Co KG
6
PRODUCT MARKING AND BARCODE IDENTIFICATION
6
Chapter 1 Introduction
Printer Specifications
Model e4/200 (203dpi ) e4/300 (300dpi )
Printing method Direct thermal & Thermal transfer
Printing resolution 203dpi (8dots/mm) 300dpi (11.8dots/mm)
Max printing speed 4ips (101.6mm/s) 3ips (76.2mm/s)
Max printing width 4.25” (108mm) 4.17? (106mm)
Max printing length 40" (1016mm)
Memory 2MB FLASH ROM, 4MB SDRAM
Media Roll-feed, die-cut, continuous, fan-fold, tags, tickets in plain
paper or thermal paper - Width 110mm max. 27mm min.
Supply roll: OD 6" (152mm) max., ID 1" (25.4mm) min.
Ribbon Wax, Wax/Resin, Resin
Ribbon roll: OD 3" (76.2mm) max., ID 1" (25.4mm) core
Max width: 110mm; Max length: 360M
Fonts Windows True Type Fonts (when using Windows drivers); Five
built-in ASCII fonts and a 24x24 dot matrix Chinese font.
Bar Code Types* 1D Barcode : Code 39,Code 93,Code 128/subset A,B,C
Codabar, Interleave 2 of 5,UPC A/E 2 and 5 add-on,
EAN-13/8/128,UCC-128, Postnet, Plessey, HBIC, Telepen,
FIM and so on»
2D Barcode : MaxiCode, PDF417, Data matrix and so on.
Media sensor Reflective
Interfaces RS-232 serial, Centronics , USB and Ethernet
Power rating 24 VDC, 2.0A**
Weight 3.5 kg
Dimensions W256 x D329 x H200mm
Operation environment Temperature: 40°F–100°F (0°C – 40°C)
Relative humidity: 5% - 85% non condensing
* Theoretically, the printer can print any type of barcode, as determined by the software you are
using.
** Power for e4-series barcode label printer is provided via an external power adaptor.
Specifications for Power Adapter
Input :AC 100~240V, 47~63HZ Output: DC 24V, 2.0 A Environment: 0°C ~ 40°C