CAB MACH2 - LCD Interface - Introduction

22 22
6.2 LCD Interface – Introduction
Status of LCD Interface
When printer is on standby status (ready to print), the LCD interface will display “Ready” on screen.
You can only print on this “Ready“ status.
MACH2/200 V1.RC0
If there is any printers error, the LCD screen will display the error screen to show the type of error.
Youcanxtheerroraccordingthenotice.
WARNING ICON
ERROR DESCRIPTION
ERROR ICON
Check Ribbon
MACH2/200 V1.RC0
IconDenition
To upper level
Appears on the Navigation Icon of SettingPages. It guides you back to
upper level bypressing “LEFT“ key.
To upper level
Appears on the Navigation Icon of SettingValue Pages. It guides you
back to upper levelby pressing “UP“ key.
Lock
On Setting Value pages, press “RIGTH“ key to lock the value for
preventing unexpected change.
Unlock For locked value, press “RIGHT” key again tounlock the value.
Scroll the value
On Setting Value pages, press “UP“ or “DOWN“ key to scroll the values
for your selection.
Table 1 IconDenitionLCDInterface
6 Printer Setting and Control