CAB MACH2 - Device Overview; Unpacking and Box Content

6 6
2 Device Overview
2.1 Unpacking and Box Content
1. Lift the printer out of the box via the straps.
2. Check printer for damage which may have occurred during transport.
3. Set up printer on a level surface.
4. Check delivery for completeness.
Made in Germany
MACH2
Operator‘s Manual
Label Printer
1
2
3
7
4
5
6
8
1 MACH2 Label Printer
2 Empty ribbon core
3 Ribbon hubs - Set of 2
4 USB cable
5 Power adapter, Power cord
6 AC Adapter
7 MACH Quick guide
8 DVD including cablabel S3 software and
MACH1 user manual
Fig. 1 Box Content
i
Note!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
 Set up transfer printers only in dry locations protected from splash water.